[xdebug-general] Re: arrays in local context limited to 31 elems?

Hi Mike.

Yes, that would be my fault q:)
I was ment to be configurable, will be in next release.

Best,
-Zobo

----- Original Message -----
From: "Mike D'Ambrogia" <miked[@]jamagination.com>
To: <xdebug-general[@]lists.xdebug.org>
Sent: Wednesday, October 24, 2007 8:47 PM
Subject: [xdebug-general] Re: arrays in local context limited to 31 elems?

> <log file sent to Derick offline>
>
> I used debugclient-0.9.0.exe in order to reproduce the problem in a
> known environment.
>
> Added some new code to the sample code to make this simplier:
>
> <?
> $myArray = array();
> for ($x=0;$x<200;$x++) {
> $myArray[] = 'node' . $x;
> if ($x > 35) {
> echo "place a breakpoint here, x=" . $x . "<BR>";
> }
> }
> ?>
>
>
> Dbgp cmds:
>
> Tried this one first, but wasn't exactly sure what the 'feature_set' cmd
> was trying to accomplish -it seems to be generated by the notepad++
> xdebug plugin by default
>
> source -i 1 -f file:///home/miked/htdocs/array_test.php
> feature_set -i 2 -n max_depth -v 30
> breakpoint_set -i 3 -t line -f file:///home/miked/htdocs/array_test.php
> -n 6 run -i 4 context_get -i 5 -c 0
>
> So thinned it down removing the 'feature_set' to this which is shown in
> the log file results attached
>
> source -i 1 -f file:///home/miked/htdocs/array_test.php
> breakpoint_set -i 2 -t line -f file:///home/miked/htdocs/array_test.php
> -n 6 run -i 3 context_get -i 4 -c 0
>
> My xdebug config settings for php.ini
>
> # xdebug config
> php_value xdebug.remote_enable 1
> php_value xdebug.remote_handler dbgp
> php_value xdebug.remote_mode req
> php_value xdebug.remote_host 192.168.152.70
> php_value xdebug.profiler_enable 0
> php_value xdebug.profiler_output_dir /home/miked/var/log
> php_value xdebug.var_display_max_children 2048
> php_value xdebug.var_display_max_data 2048
> php_value xdebug.var_display_max_depth 20
>
> Phpinfo() output for xdebug:
>
> xdebug
> xdebug support enabled
> Version 2.0.0
>
> Supported protocols Revision
> DBGp - Common DeBuGger Protocol $Revision: 1.125 $
> GDB - GNU Debugger protocol $Revision: 1.87 $
> PHP3 - PHP 3 Debugger protocol $Revision: 1.22 $
>
> Directive Local Value Master Value
> xdebug.auto_trace Off Off
> xdebug.collect_includes On On
> xdebug.collect_params 0 0
> xdebug.collect_return Off Off
> xdebug.collect_vars Off Off
> xdebug.default_enable On On
> xdebug.dump.COOKIE no value no value
> xdebug.dump.ENV no value no value
> xdebug.dump.FILES no value no value
> xdebug.dump.GET no value no value
> xdebug.dump.POST no value no value
> xdebug.dump.REQUEST no value no value
> xdebug.dump.SERVER no value no value
> xdebug.dump.SESSION no value no value
> xdebug.dump_globals On On
> xdebug.dump_once On On
> xdebug.dump_undefined Off Off
> xdebug.extended_info On On
> xdebug.idekey miked no value
> xdebug.manual_url http://www.php.net http://www.php.net
> xdebug.max_nesting_level 100 100
> xdebug.profiler_aggregate Off Off
> xdebug.profiler_append Off Off
> xdebug.profiler_enable Off Off
> xdebug.profiler_enable_trigger Off Off
> xdebug.profiler_output_dir /home/miked/var/log /tmp
> xdebug.profiler_output_name cachegrind.out.%p
> cachegrind.out.%p
> xdebug.remote_autostart Off Off
> xdebug.remote_enable On Off
> xdebug.remote_handler dbgp dbgp
> xdebug.remote_host 192.168.152.70 localhost
> xdebug.remote_log no value no value
> xdebug.remote_mode req req
> xdebug.remote_port 9000 9000
> xdebug.show_exception_trace Off Off
> xdebug.show_local_vars Off Off
> xdebug.show_mem_delta Off Off
> xdebug.trace_format 0 0
> xdebug.trace_options 0 0
> xdebug.trace_output_dir /tmp /tmp
> xdebug.trace_output_name trace.%c trace.%c
> xdebug.var_display_max_children 2048 128
> xdebug.var_display_max_data 2048 512
> xdebug.var_display_max_depth 20 3
>
>
> I'm assuming that its something stupid that I'm doing but not sure what
>
> Mike
>
>
>
> -----Original Message-----
> From: xdebug-general-bounce[@]lists.xdebug.org
> [mailto:xdebug-general-bounce[@]lists.xdebug.org] On Behalf Of Derick
> Rethans
> Sent: Wednesday, October 24, 2007 10:58 AM
> To: Mike D'Ambrogia
> Cc: xdebug-general[@]lists.xdebug.org
> Subject: [xdebug-general] Re: arrays in local context limited to 31
> elems?
>
>
> On Wed, 24 Oct 2007, Mike D'Ambrogia wrote:
>
>> searched the doc on the site and the email list archives for info on
>> this without success
>>
>> remote debugging on apache server
>>
>> As the array builds while stepping thru the code I see a maximum of 31
>> nodes in the local context pane for the array even if more than 31
>> exist
>
> Perhaps it's a client issue? Make a remote log to find out. You can find
>
> information on how to do so here:
> http://xdebug.org/support.php under "Remote Debugger Bugs".
>
>> have set:
>> xdebug.var_display_max_children 2048 xdebug.var_display_max_data 2048
>> xdebug.var_display_max_depth 20
>>
>> overkill I know, but they have no effect on the number of nodes
>> displayed for the array .
>
> Did you verify that those settings where in effect? phpinfo() will be
> able to tell you.
>
> regards,
> Derick
>
> --
> Like Xdebug? Send a postcard:
> http://derickrethans.nl/xdebug_2_released.php
> Xdebug | http://xdebug.org | xdebug-general@lists.xdebug.org
>
>
>
>
Received on Wed Oct 24 2007 - 21:53:11 BST