[xdebug-general] Re: xdebug

silly question, where did you put the breakpoint exactly?

On 19 March 2018 at 17:49, Richard Dunne <richarddunnebsc[@]gmail.com> wrote:

> Yes and yes.
>
> On Mon, 19 Mar 2018 at 17:43 Marco "Debo" De Bortoli <
> marco.debo.debortoli[@]gmail.com> wrote:
>
>> Did you activate listen mode? Did you add a breakpoint on the line where
>> you want the debugger to stop?
>>
>> On 19 March 2018 at 17:42, Richard Dunne <richarddunnebsc[@]gmail.com>
>> wrote:
>>
>>> I've started a debug session in the browser, reloaded the page, Switch
>>> to PhpStorm; you'll see the *Incoming Connection From Xdebug* dialogue.
>>> That didn't happen.
>>>
>>> On Mon, 19 Mar 2018 at 16:46 Marco "Debo" De Bortoli <
>>> marco.debo.debortoli[@]gmail.com> wrote:
>>>
>>>> I use neither. As I explained to you, you have to use the xdebug helper
>>>> of your browser and put PhpStorm in listening mode. Look at this zero
>>>> configuration blog post from JetBrains
>>>>
>>>> https://blog.jetbrains.com/webide/2011/02/zero-
>>>> configuration-debugging-with-xdebug-and-phpstorm-2-0/
>>>>
>>>> Please let me know if that works.
>>>>
>>>> Debo
>>>>
>>>> On 19 March 2018 at 16:12, Richard Dunne <richarddunnebsc[@]gmail.com>
>>>> wrote:
>>>>
>>>>> I'm currently using PhpStorm. I want to debug code after submitting a
>>>>> form. There are three options, Run, Debug and Run with Coverage. Which is
>>>>> the correct option to use?
>>>>>
>>>>> On Mon, 19 Mar 2018 at 16:02 Richard Dunne <richarddunnebsc[@]gmail.com>
>>>>> wrote:
>>>>>
>>>>>> After adding zend_extension = c:\wamp64\bin\php\php7.1.9\
>>>>>> ext\php_xdebug-2.6.0-7.1-vc14-x86_64.dll
>>>>>> to
>>>>>> C:\wamp64\bin\apache\apache2.4.27\bin\php.ini
>>>>>> xdebug now appears in phpinfo.
>>>>>>
>>>>>> On Mon, 19 Mar 2018 at 14:51 Richard Dunne <richarddunnebsc[@]gmail.com>
>>>>>> wrote:
>>>>>>
>>>>>>> The odd thing is it was in phpinfo when I was using VSC. I've been
>>>>>>> trying PhpStorm today. According to the install instructions
>>>>>>> zend_extension=<full_path_to_xdebug_extension>
>>>>>>> xdebug.remote_enable=1
>>>>>>> xdebug.remote_host=<the host where PhpStorm is running (e.g.
>>>>>>> localhost)>
>>>>>>> xdebug.remote_port=<the port to which Xdebug tries to connect on the
>>>>>>> host where PhpStorm is running (default 9000)>
>>>>>>>
>>>>>>> zend_extension = "c:\wamp64\bin\php\php7.1.9\
>>>>>>> ext\php_xdebug-2.6.0-7.2-vc15-x86_64.dll"
>>>>>>> xdebug.remote_enable = 1
>>>>>>> xdebug.remote_host=localhost
>>>>>>> xdebug.remote_port=9000
>>>>>>>
>>>>>>> C:\wamp64\bin\php\php7.1.9>php -v
>>>>>>> PHP 7.1.9 (cli) (built: Aug 30 2017 18:34:46) ( ZTS MSVC14 (Visual
>>>>>>> C++ 2015) x64 )
>>>>>>> Copyright (c) 1997-2017 The PHP Group
>>>>>>> Zend Engine v3.1.0, Copyright (c) 1998-2017 Zend Technologies
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> On Mon, 19 Mar 2018 at 14:37 Marco "Debo" De Bortoli <
>>>>>>> marco.debo.debortoli[@]gmail.com> wrote:
>>>>>>>
>>>>>>>> But that would explain why the debugging is not working... if
>>>>>>>> xdebug doesn't appear it means it's not loaded.
>>>>>>>>
>>>>>>>> On 19 March 2018 at 14:03, Richard Dunne <richarddunnebsc[@]gmail.com
>>>>>>>> > wrote:
>>>>>>>>
>>>>>>>>> These are the settings in the .ini
>>>>>>>>>
>>>>>>>>> zend_extension = "c:\wamp64\bin\php\php7.1.9\
>>>>>>>>> ext\php_xdebug-2.6.0-7.1-vc14-x86_64.dll"
>>>>>>>>>
>>>>>>>>> xdebug.remote_enable = 1
>>>>>>>>> xdebug.remote_autostart = 0
>>>>>>>>> xdebug.remote_log = "c:/wamp64/php/php7.1.9/xdebug.log"
>>>>>>>>> xdebug.remote_connect_back=0
>>>>>>>>> xdebug.remote_host=127.0.0.1
>>>>>>>>> xdebug.remote_port=9000
>>>>>>>>> xdebug.profiler_enable = off
>>>>>>>>> xdebug.profiler_enable_trigger = Off
>>>>>>>>> xdebug.profiler_output_name = cachegrind.out.%t.%p
>>>>>>>>> xdebug.profiler_output_dir ="c:/wamp64/tmp"
>>>>>>>>> xdebug.show_local_vars=0
>>>>>>>>>
>>>>>>>>> I restarted wampserver, I just noticed that xdebug does not appear
>>>>>>>>> in phpinfo. That's not helpful.
>>>>>>>>>
>>>>>>>>> On Mon, 19 Mar 2018 at 12:27 Marco "Debo" De Bortoli <
>>>>>>>>> marco.debo.debortoli[@]gmail.com> wrote:
>>>>>>>>>
>>>>>>>>>> Did you also do the other things I mentioned?
>>>>>>>>>>
>>>>>>>>>> On 19 March 2018 at 12:19, Richard Dunne <
>>>>>>>>>> richarddunnebsc[@]gmail.com> wrote:
>>>>>>>>>>
>>>>>>>>>>> Yes, XDebug is installed and loaded.
>>>>>>>>>>>
>>>>>>>>>>> On Mon, 19 Mar 2018 at 12:11 Marco "Debo" De Bortoli <
>>>>>>>>>>> marco.debo.debortoli[@]gmail.com> wrote:
>>>>>>>>>>>
>>>>>>>>>>>> Hi Richard,
>>>>>>>>>>>>
>>>>>>>>>>>> sorry my bad, I should have specified that I'm using OSX hence
>>>>>>>>>>>> the .so instead of the .dll.
>>>>>>>>>>>> What about the remote host address, although it shouldn't be
>>>>>>>>>>>> needed with phpstorm in listening mode?Did you verified that xdebug is
>>>>>>>>>>>> loaded?
>>>>>>>>>>>>
>>>>>>>>>>>> On 19 March 2018 at 12:07, Richard Dunne <
>>>>>>>>>>>> richarddunnebsc[@]gmail.com> wrote:
>>>>>>>>>>>>
>>>>>>>>>>>>> zend_extension=/usr/lib64/php/5.6/modules/xdebug.so
>>>>>>>>>>>>> The ini file only uses .dll or so I thought. In any case, I
>>>>>>>>>>>>> don't have xdebug.so in the ini if that's where its supposed to be.
>>>>>>>>>>>>>
>>>>>>>>>>>>> On Mon, 19 Mar 2018 at 11:19 Marco "Debo" De Bortoli <
>>>>>>>>>>>>> marco.debo.debortoli[@]gmail.com> wrote:
>>>>>>>>>>>>>
>>>>>>>>>>>>>> Hi Richard,
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> I'm not sure why is not working for you but I can notice few
>>>>>>>>>>>>>> differences in you .ini configuration compared to the one I usually use
>>>>>>>>>>>>>> myself. You can find it here
>>>>>>>>>>>>>> <https://gist.github.com/debo/b6d212cdb759269de929>.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Also, apologies if I'm asking something that you already
>>>>>>>>>>>>>> mentioned but, did you ensure that the xdebug is actually loaded and active?
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> In terms of how to debug, I usually use PhpStorm, I do
>>>>>>>>>>>>>> activate the listening mode which the telephone shaped icon, then activate
>>>>>>>>>>>>>> the xdebug helper in the browser in the page I want to debug and then start
>>>>>>>>>>>>>> interacting with the page itself; also don't forget to add breakpoints or
>>>>>>>>>>>>>> the debugger won't stop unless you tell it to stop on the first line.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> I hope it helps.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Debo
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> On 19 March 2018 at 11:08, Richard Dunne <
>>>>>>>>>>>>>> richarddunnebsc[@]gmail.com> wrote:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> I installed PhpStorm for comparison. PhpStorm opens the
>>>>>>>>>>>>>>> current script in a web browser for user input. VSC doesn't do that. I'm
>>>>>>>>>>>>>>> still trying to figure out why XDebug isn't engaging when the form is
>>>>>>>>>>>>>>> submitted in Listen for XDebug config and XDebug Helper is engaged and in
>>>>>>>>>>>>>>> debug mode.
>>>>>>>>>>>>>>> These are the settings I have
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> launch.json
>>>>>>>>>>>>>>> "version": "0.2.0",
>>>>>>>>>>>>>>> "configurations": [
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> {
>>>>>>>>>>>>>>> "name": "Listen for XDebug",
>>>>>>>>>>>>>>> "type": "php",
>>>>>>>>>>>>>>> "request": "launch",
>>>>>>>>>>>>>>> "port": 9000
>>>>>>>>>>>>>>> },
>>>>>>>>>>>>>>> {
>>>>>>>>>>>>>>> "name": "Launch currently open script",
>>>>>>>>>>>>>>> "type": "php",
>>>>>>>>>>>>>>> "request": "launch",
>>>>>>>>>>>>>>> "program": "${file}",
>>>>>>>>>>>>>>> "cwd": "${fileDirname}",
>>>>>>>>>>>>>>> "port": 9000
>>>>>>>>>>>>>>> }
>>>>>>>>>>>>>>> ]
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> settings.json user settings
>>>>>>>>>>>>>>> "php.validate.executablePath": "C:/wamp64/bin/php/php7.1.9/
>>>>>>>>>>>>>>> php.exe",
>>>>>>>>>>>>>>> "php.executablePath": "C:/wamp64/bin/php/php7.1.9/
>>>>>>>>>>>>>>> php.exe",
>>>>>>>>>>>>>>> "workbench.startupEditor": "newUntitledFile",
>>>>>>>>>>>>>>> "files.autoSave": "onWindowChange",
>>>>>>>>>>>>>>> "workbench.editor.enablePreview": false,
>>>>>>>>>>>>>>> "git.ignoreMissingGitWarning": true
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> phpForApache.ini
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> [xdebug]
>>>>>>>>>>>>>>> zend_extension = "c:\wamp64\bin\php\php7.1.9\
>>>>>>>>>>>>>>> ext\php_xdebug-2.6.0-7.1-vc14-x86_64.dll"
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> xdebug.remote_enable = On
>>>>>>>>>>>>>>> xdebug.remote_autostart = 1
>>>>>>>>>>>>>>> xdebug.remote_log = "c:/wamp64/php/php7.1.9/xdebug.log"
>>>>>>>>>>>>>>> xdebug.profiler_enable = off
>>>>>>>>>>>>>>> xdebug.profiler_enable_trigger = Off
>>>>>>>>>>>>>>> xdebug.profiler_output_name = cachegrind.out.%t.%p
>>>>>>>>>>>>>>> xdebug.profiler_output_dir ="c:/wamp64/tmp"
>>>>>>>>>>>>>>> xdebug.show_local_vars=0
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Is there anything missing?
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> On Sun, 18 Mar 2018 at 21:06 Richard Dunne <
>>>>>>>>>>>>>>> richarddunnebsc[@]gmail.com> wrote:
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> I changed the log location to include the filename, but
>>>>>>>>>>>>>>>> still no joy, log not created. Th documentation on XDebug is very limited
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> On Sun, 18 Mar 2018 at 19:57 Spencer Williams IV <
>>>>>>>>>>>>>>>> enderandpeter[@]yahoo.com> wrote:
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> On Sunday, March 18, 2018, 1:31:50 PM MDT, Richard Dunne <
>>>>>>>>>>>>>>>>> richarddunnebsc[@]gmail.com> wrote:
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> I have set a path for xdebug.remote_log,
>>>>>>>>>>>>>>>>> xdebug.remote_log = "c:/wamp64/php/php7.1.9"
>>>>>>>>>>>>>>>>> I started XDebug in Visual Studio Code with Listen for
>>>>>>>>>>>>>>>>> XDebug config, then I enabled debugging in the
>>>>>>>>>>>>>>>>> browser(XDebug Helper), then selected Debug.
>>>>>>>>>>>>>>>>> Submitted the form with the hope that XDebug would do its
>>>>>>>>>>>>>>>>> thing. The code executed, but the debugger didn't do anything, such as
>>>>>>>>>>>>>>>>> create a log.
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> On Sun, 18 Mar 2018 at 16:52 Spencer Williams IV <
>>>>>>>>>>>>>>>>> enderandpeter[@]yahoo.com> wrote:
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> On Sunday, March 18, 2018, 9:38:46 AM MDT, Richard Dunne <
>>>>>>>>>>>>>>>>> richarddunnebsc[@]gmail.com> wrote:
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> I'm familiar with code breakpoints, not the form handler.
>>>>>>>>>>>>>>>>> Is there any documentation on that?
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> On Sun, 18 Mar 2018 at 07:58 Tim Hawkins <
>>>>>>>>>>>>>>>>> tim.thawkins[@]gmail.com> wrote:
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> You need to set a breakpoint on your form handler with
>>>>>>>>>>>>>>>>> your ide.
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> On Sun, Mar 18, 2018, 10:52 Richard Dunne <
>>>>>>>>>>>>>>>>> richarddunnebsc[@]gmail.com> wrote:
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> These are the ini settings
>>>>>>>>>>>>>>>>> zend_extension = "c:\wamp64\bin\php\php7.1.9\
>>>>>>>>>>>>>>>>> ext\php_xdebug-2.6.0-7.1-vc14-x86_64.dll"
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> xdebug.remote_enable = On
>>>>>>>>>>>>>>>>> xdebug.remote_autostart = 1
>>>>>>>>>>>>>>>>> xdebug.remote_log = "c:/wamp64/php/php7.1.9"
>>>>>>>>>>>>>>>>> xdebug.profiler_enable = off
>>>>>>>>>>>>>>>>> xdebug.profiler_enable_trigger = Off
>>>>>>>>>>>>>>>>> xdebug.profiler_output_name = cachegrind.out.%t.%p
>>>>>>>>>>>>>>>>> xdebug.profiler_output_dir ="c:/wamp64/tmp"
>>>>>>>>>>>>>>>>> xdebug.show_local_vars=0
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> "There are handful of nice browser plugins out there where
>>>>>>>>>>>>>>>>> you can enable the sending of the appropriate data to trigger the Xdebug
>>>>>>>>>>>>>>>>> session"
>>>>>>>>>>>>>>>>> This is new information. I thought once the debugger was
>>>>>>>>>>>>>>>>> set to Listen for Xdebug, that's all that was required. I added XDebug
>>>>>>>>>>>>>>>>> Helper to Chrome. Does it required any config within Visual Studio Code or
>>>>>>>>>>>>>>>>> php.ini? Does XDebug Helper engage XDebug when a form is submitted?
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> On Sat, 17 Mar 2018 at 21:49 Spencer Williams <
>>>>>>>>>>>>>>>>> enderandpeter[@]yahoo.com> wrote:
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> On 3/16/2018 12:34 PM, Richard Dunne wrote:
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> How do I get XDebug to start debugging when I submit a
>>>>>>>>>>>>>>>>> form?. I start the debugger, Step buttons are inactive and nothing happens
>>>>>>>>>>>>>>>>> when I submit a form. Are there any tutorials for this?
>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>> Sincerely,
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Richard Dunne B.Sc.
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Did you get it working? What xdebug INI settings have you
>>>>>>>>>>>>>>>>> set? Make sure to at least enable xdebug.remote_enable.
>>>>>>>>>>>>>>>>> Is the web server running directly on the host machine? Or in a VM of some
>>>>>>>>>>>>>>>>> kind? If the latter is the case, then you'll want to make sure
>>>>>>>>>>>>>>>>> xdebug.remote_host is set appropriately, as
>>>>>>>>>>>>>>>>> xdebug.remote_connect_back might not get the appropriate
>>>>>>>>>>>>>>>>> hostname/IP automatically.
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Also, you can either set xdebug.remote_autostart or make
>>>>>>>>>>>>>>>>> sure you set a request variable or cookie of the expected
>>>>>>>>>>>>>>>>> name and value
>>>>>>>>>>>>>>>>> <https://xdebug.org/docs/remote#browser_session> when
>>>>>>>>>>>>>>>>> submitting the form. There are handful of nice browser plugins out there
>>>>>>>>>>>>>>>>> where you can enable the sending of the appropriate data to trigger the
>>>>>>>>>>>>>>>>> Xdebug session. And make sure your IDE is listening for Xdebug responses,
>>>>>>>>>>>>>>>>> of course. If anything, you can set xdebug.remote_log to
>>>>>>>>>>>>>>>>> try to get a better idea of what might be going on.
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Let us know how things progress...
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> --Spencer
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>> Sincerely,
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Richard Dunne B.Sc.
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>> Sincerely,
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Richard Dunne B.Sc.
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Yes, if you set xdebug.remote_autostart you won't have to
>>>>>>>>>>>>>>>>> send the request data. Try setting xdebug.remote_log to a
>>>>>>>>>>>>>>>>> path where it can create a log file. Let us know what it says when you make
>>>>>>>>>>>>>>>>> a request to the server. Also what IDE are you using?
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> --Spencer
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>> Sincerely,
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Richard Dunne B.Sc.
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Make sure to set xdebug.remote_log to a file path rather
>>>>>>>>>>>>>>>>> than to a directory. So try c:/wamp64/php/php7.1.9/xdebug.
>>>>>>>>>>>>>>>>> log. Sadly I haven't worked with Xdebug in Visual Studio
>>>>>>>>>>>>>>>>> Code yet. Hopefully there are some guides online that will help as well.
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> --Spencer
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>> Sincerely,
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Richard Dunne B.Sc.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>> Sincerely,
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Richard Dunne B.Sc.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> --
>>>>>>>>>>>>> Sincerely,
>>>>>>>>>>>>>
>>>>>>>>>>>>> Richard Dunne B.Sc.
>>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> --
>>>>>>>>>>> Sincerely,
>>>>>>>>>>>
>>>>>>>>>>> Richard Dunne B.Sc.
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> --
>>>>>>>>> Sincerely,
>>>>>>>>>
>>>>>>>>> Richard Dunne B.Sc.
>>>>>>>>>
>>>>>>>>
>>>>>>>> --
>>>>>>> Sincerely,
>>>>>>>
>>>>>>> Richard Dunne B.Sc.
>>>>>>>
>>>>>> --
>>>>>> Sincerely,
>>>>>>
>>>>>> Richard Dunne B.Sc.
>>>>>>
>>>>> --
>>>>> Sincerely,
>>>>>
>>>>> Richard Dunne B.Sc.
>>>>>
>>>>
>>>> --
>>> Sincerely,
>>>
>>> Richard Dunne B.Sc.
>>>
>>
>> --
> Sincerely,
>
> Richard Dunne B.Sc.
>
Received on Mon Mar 19 2018 - 18:06:20 GMT