[xdebug-general] Re: xdebug

Did you activate listen mode? Did you add a breakpoint on the line where
you want the debugger to stop?

On 19 March 2018 at 17:42, Richard Dunne <richarddunnebsc[@]gmail.com> wrote:

> I've started a debug session in the browser, reloaded the page, Switch to
> PhpStorm; you'll see the *Incoming Connection From Xdebug* dialogue.
> That didn't happen.
>
> On Mon, 19 Mar 2018 at 16:46 Marco "Debo" De Bortoli <
> marco.debo.debortoli[@]gmail.com> wrote:
>
>> I use neither. As I explained to you, you have to use the xdebug helper
>> of your browser and put PhpStorm in listening mode. Look at this zero
>> configuration blog post from JetBrains
>>
>> https://blog.jetbrains.com/webide/2011/02/zero-
>> configuration-debugging-with-xdebug-and-phpstorm-2-0/
>>
>> Please let me know if that works.
>>
>> Debo
>>
>> On 19 March 2018 at 16:12, Richard Dunne <richarddunnebsc[@]gmail.com>
>> wrote:
>>
>>> I'm currently using PhpStorm. I want to debug code after submitting a
>>> form. There are three options, Run, Debug and Run with Coverage. Which is
>>> the correct option to use?
>>>
>>> On Mon, 19 Mar 2018 at 16:02 Richard Dunne <richarddunnebsc[@]gmail.com>
>>> wrote:
>>>
>>>> After adding zend_extension = c:\wamp64\bin\php\php7.1.9\
>>>> ext\php_xdebug-2.6.0-7.1-vc14-x86_64.dll
>>>> to
>>>> C:\wamp64\bin\apache\apache2.4.27\bin\php.ini
>>>> xdebug now appears in phpinfo.
>>>>
>>>> On Mon, 19 Mar 2018 at 14:51 Richard Dunne <richarddunnebsc[@]gmail.com>
>>>> wrote:
>>>>
>>>>> The odd thing is it was in phpinfo when I was using VSC. I've been
>>>>> trying PhpStorm today. According to the install instructions
>>>>> zend_extension=<full_path_to_xdebug_extension>
>>>>> xdebug.remote_enable=1
>>>>> xdebug.remote_host=<the host where PhpStorm is running (e.g.
>>>>> localhost)>
>>>>> xdebug.remote_port=<the port to which Xdebug tries to connect on the
>>>>> host where PhpStorm is running (default 9000)>
>>>>>
>>>>> zend_extension = "c:\wamp64\bin\php\php7.1.9\
>>>>> ext\php_xdebug-2.6.0-7.2-vc15-x86_64.dll"
>>>>> xdebug.remote_enable = 1
>>>>> xdebug.remote_host=localhost
>>>>> xdebug.remote_port=9000
>>>>>
>>>>> C:\wamp64\bin\php\php7.1.9>php -v
>>>>> PHP 7.1.9 (cli) (built: Aug 30 2017 18:34:46) ( ZTS MSVC14 (Visual C++
>>>>> 2015) x64 )
>>>>> Copyright (c) 1997-2017 The PHP Group
>>>>> Zend Engine v3.1.0, Copyright (c) 1998-2017 Zend Technologies
>>>>>
>>>>>
>>>>>
>>>>> On Mon, 19 Mar 2018 at 14:37 Marco "Debo" De Bortoli <
>>>>> marco.debo.debortoli[@]gmail.com> wrote:
>>>>>
>>>>>> But that would explain why the debugging is not working... if xdebug
>>>>>> doesn't appear it means it's not loaded.
>>>>>>
>>>>>> On 19 March 2018 at 14:03, Richard Dunne <richarddunnebsc[@]gmail.com>
>>>>>> wrote:
>>>>>>
>>>>>>> These are the settings in the .ini
>>>>>>>
>>>>>>> zend_extension = "c:\wamp64\bin\php\php7.1.9\
>>>>>>> ext\php_xdebug-2.6.0-7.1-vc14-x86_64.dll"
>>>>>>>
>>>>>>> xdebug.remote_enable = 1
>>>>>>> xdebug.remote_autostart = 0
>>>>>>> xdebug.remote_log = "c:/wamp64/php/php7.1.9/xdebug.log"
>>>>>>> xdebug.remote_connect_back=0
>>>>>>> xdebug.remote_host=127.0.0.1
>>>>>>> xdebug.remote_port=9000
>>>>>>> xdebug.profiler_enable = off
>>>>>>> xdebug.profiler_enable_trigger = Off
>>>>>>> xdebug.profiler_output_name = cachegrind.out.%t.%p
>>>>>>> xdebug.profiler_output_dir ="c:/wamp64/tmp"
>>>>>>> xdebug.show_local_vars=0
>>>>>>>
>>>>>>> I restarted wampserver, I just noticed that xdebug does not appear
>>>>>>> in phpinfo. That's not helpful.
>>>>>>>
>>>>>>> On Mon, 19 Mar 2018 at 12:27 Marco "Debo" De Bortoli <
>>>>>>> marco.debo.debortoli[@]gmail.com> wrote:
>>>>>>>
>>>>>>>> Did you also do the other things I mentioned?
>>>>>>>>
>>>>>>>> On 19 March 2018 at 12:19, Richard Dunne <richarddunnebsc[@]gmail.com
>>>>>>>> > wrote:
>>>>>>>>
>>>>>>>>> Yes, XDebug is installed and loaded.
>>>>>>>>>
>>>>>>>>> On Mon, 19 Mar 2018 at 12:11 Marco "Debo" De Bortoli <
>>>>>>>>> marco.debo.debortoli[@]gmail.com> wrote:
>>>>>>>>>
>>>>>>>>>> Hi Richard,
>>>>>>>>>>
>>>>>>>>>> sorry my bad, I should have specified that I'm using OSX hence
>>>>>>>>>> the .so instead of the .dll.
>>>>>>>>>> What about the remote host address, although it shouldn't be
>>>>>>>>>> needed with phpstorm in listening mode?Did you verified that xdebug is
>>>>>>>>>> loaded?
>>>>>>>>>>
>>>>>>>>>> On 19 March 2018 at 12:07, Richard Dunne <
>>>>>>>>>> richarddunnebsc[@]gmail.com> wrote:
>>>>>>>>>>
>>>>>>>>>>> zend_extension=/usr/lib64/php/5.6/modules/xdebug.so
>>>>>>>>>>> The ini file only uses .dll or so I thought. In any case, I
>>>>>>>>>>> don't have xdebug.so in the ini if that's where its supposed to be.
>>>>>>>>>>>
>>>>>>>>>>> On Mon, 19 Mar 2018 at 11:19 Marco "Debo" De Bortoli <
>>>>>>>>>>> marco.debo.debortoli[@]gmail.com> wrote:
>>>>>>>>>>>
>>>>>>>>>>>> Hi Richard,
>>>>>>>>>>>>
>>>>>>>>>>>> I'm not sure why is not working for you but I can notice few
>>>>>>>>>>>> differences in you .ini configuration compared to the one I usually use
>>>>>>>>>>>> myself. You can find it here
>>>>>>>>>>>> <https://gist.github.com/debo/b6d212cdb759269de929>.
>>>>>>>>>>>>
>>>>>>>>>>>> Also, apologies if I'm asking something that you already
>>>>>>>>>>>> mentioned but, did you ensure that the xdebug is actually loaded and active?
>>>>>>>>>>>>
>>>>>>>>>>>> In terms of how to debug, I usually use PhpStorm, I do activate
>>>>>>>>>>>> the listening mode which the telephone shaped icon, then activate the
>>>>>>>>>>>> xdebug helper in the browser in the page I want to debug and then start
>>>>>>>>>>>> interacting with the page itself; also don't forget to add breakpoints or
>>>>>>>>>>>> the debugger won't stop unless you tell it to stop on the first line.
>>>>>>>>>>>>
>>>>>>>>>>>> I hope it helps.
>>>>>>>>>>>>
>>>>>>>>>>>> Debo
>>>>>>>>>>>>
>>>>>>>>>>>> On 19 March 2018 at 11:08, Richard Dunne <
>>>>>>>>>>>> richarddunnebsc[@]gmail.com> wrote:
>>>>>>>>>>>>
>>>>>>>>>>>>> I installed PhpStorm for comparison. PhpStorm opens the
>>>>>>>>>>>>> current script in a web browser for user input. VSC doesn't do that. I'm
>>>>>>>>>>>>> still trying to figure out why XDebug isn't engaging when the form is
>>>>>>>>>>>>> submitted in Listen for XDebug config and XDebug Helper is engaged and in
>>>>>>>>>>>>> debug mode.
>>>>>>>>>>>>> These are the settings I have
>>>>>>>>>>>>>
>>>>>>>>>>>>> launch.json
>>>>>>>>>>>>> "version": "0.2.0",
>>>>>>>>>>>>> "configurations": [
>>>>>>>>>>>>>
>>>>>>>>>>>>> {
>>>>>>>>>>>>> "name": "Listen for XDebug",
>>>>>>>>>>>>> "type": "php",
>>>>>>>>>>>>> "request": "launch",
>>>>>>>>>>>>> "port": 9000
>>>>>>>>>>>>> },
>>>>>>>>>>>>> {
>>>>>>>>>>>>> "name": "Launch currently open script",
>>>>>>>>>>>>> "type": "php",
>>>>>>>>>>>>> "request": "launch",
>>>>>>>>>>>>> "program": "${file}",
>>>>>>>>>>>>> "cwd": "${fileDirname}",
>>>>>>>>>>>>> "port": 9000
>>>>>>>>>>>>> }
>>>>>>>>>>>>> ]
>>>>>>>>>>>>>
>>>>>>>>>>>>> settings.json user settings
>>>>>>>>>>>>> "php.validate.executablePath": "C:/wamp64/bin/php/php7.1.9/
>>>>>>>>>>>>> php.exe",
>>>>>>>>>>>>> "php.executablePath": "C:/wamp64/bin/php/php7.1.9/
>>>>>>>>>>>>> php.exe",
>>>>>>>>>>>>> "workbench.startupEditor": "newUntitledFile",
>>>>>>>>>>>>> "files.autoSave": "onWindowChange",
>>>>>>>>>>>>> "workbench.editor.enablePreview": false,
>>>>>>>>>>>>> "git.ignoreMissingGitWarning": true
>>>>>>>>>>>>>
>>>>>>>>>>>>> phpForApache.ini
>>>>>>>>>>>>>
>>>>>>>>>>>>> [xdebug]
>>>>>>>>>>>>> zend_extension = "c:\wamp64\bin\php\php7.1.9\
>>>>>>>>>>>>> ext\php_xdebug-2.6.0-7.1-vc14-x86_64.dll"
>>>>>>>>>>>>>
>>>>>>>>>>>>> xdebug.remote_enable = On
>>>>>>>>>>>>> xdebug.remote_autostart = 1
>>>>>>>>>>>>> xdebug.remote_log = "c:/wamp64/php/php7.1.9/xdebug.log"
>>>>>>>>>>>>> xdebug.profiler_enable = off
>>>>>>>>>>>>> xdebug.profiler_enable_trigger = Off
>>>>>>>>>>>>> xdebug.profiler_output_name = cachegrind.out.%t.%p
>>>>>>>>>>>>> xdebug.profiler_output_dir ="c:/wamp64/tmp"
>>>>>>>>>>>>> xdebug.show_local_vars=0
>>>>>>>>>>>>>
>>>>>>>>>>>>> Is there anything missing?
>>>>>>>>>>>>>
>>>>>>>>>>>>> On Sun, 18 Mar 2018 at 21:06 Richard Dunne <
>>>>>>>>>>>>> richarddunnebsc[@]gmail.com> wrote:
>>>>>>>>>>>>>
>>>>>>>>>>>>>> I changed the log location to include the filename, but still
>>>>>>>>>>>>>> no joy, log not created. Th documentation on XDebug is very limited
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> On Sun, 18 Mar 2018 at 19:57 Spencer Williams IV <
>>>>>>>>>>>>>> enderandpeter[@]yahoo.com> wrote:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> On Sunday, March 18, 2018, 1:31:50 PM MDT, Richard Dunne <
>>>>>>>>>>>>>>> richarddunnebsc[@]gmail.com> wrote:
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> I have set a path for xdebug.remote_log,
>>>>>>>>>>>>>>> xdebug.remote_log = "c:/wamp64/php/php7.1.9"
>>>>>>>>>>>>>>> I started XDebug in Visual Studio Code with Listen for
>>>>>>>>>>>>>>> XDebug config, then I enabled debugging in the
>>>>>>>>>>>>>>> browser(XDebug Helper), then selected Debug.
>>>>>>>>>>>>>>> Submitted the form with the hope that XDebug would do its
>>>>>>>>>>>>>>> thing. The code executed, but the debugger didn't do anything, such as
>>>>>>>>>>>>>>> create a log.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> On Sun, 18 Mar 2018 at 16:52 Spencer Williams IV <
>>>>>>>>>>>>>>> enderandpeter[@]yahoo.com> wrote:
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> On Sunday, March 18, 2018, 9:38:46 AM MDT, Richard Dunne <
>>>>>>>>>>>>>>> richarddunnebsc[@]gmail.com> wrote:
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> I'm familiar with code breakpoints, not the form handler.
>>>>>>>>>>>>>>> Is there any documentation on that?
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> On Sun, 18 Mar 2018 at 07:58 Tim Hawkins <
>>>>>>>>>>>>>>> tim.thawkins[@]gmail.com> wrote:
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> You need to set a breakpoint on your form handler with your
>>>>>>>>>>>>>>> ide.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> On Sun, Mar 18, 2018, 10:52 Richard Dunne <
>>>>>>>>>>>>>>> richarddunnebsc[@]gmail.com> wrote:
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> These are the ini settings
>>>>>>>>>>>>>>> zend_extension = "c:\wamp64\bin\php\php7.1.9\
>>>>>>>>>>>>>>> ext\php_xdebug-2.6.0-7.1-vc14-x86_64.dll"
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> xdebug.remote_enable = On
>>>>>>>>>>>>>>> xdebug.remote_autostart = 1
>>>>>>>>>>>>>>> xdebug.remote_log = "c:/wamp64/php/php7.1.9"
>>>>>>>>>>>>>>> xdebug.profiler_enable = off
>>>>>>>>>>>>>>> xdebug.profiler_enable_trigger = Off
>>>>>>>>>>>>>>> xdebug.profiler_output_name = cachegrind.out.%t.%p
>>>>>>>>>>>>>>> xdebug.profiler_output_dir ="c:/wamp64/tmp"
>>>>>>>>>>>>>>> xdebug.show_local_vars=0
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> "There are handful of nice browser plugins out there where
>>>>>>>>>>>>>>> you can enable the sending of the appropriate data to trigger the Xdebug
>>>>>>>>>>>>>>> session"
>>>>>>>>>>>>>>> This is new information. I thought once the debugger was
>>>>>>>>>>>>>>> set to Listen for Xdebug, that's all that was required. I added XDebug
>>>>>>>>>>>>>>> Helper to Chrome. Does it required any config within Visual Studio Code or
>>>>>>>>>>>>>>> php.ini? Does XDebug Helper engage XDebug when a form is submitted?
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> On Sat, 17 Mar 2018 at 21:49 Spencer Williams <
>>>>>>>>>>>>>>> enderandpeter[@]yahoo.com> wrote:
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> On 3/16/2018 12:34 PM, Richard Dunne wrote:
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> How do I get XDebug to start debugging when I submit a
>>>>>>>>>>>>>>> form?. I start the debugger, Step buttons are inactive and nothing happens
>>>>>>>>>>>>>>> when I submit a form. Are there any tutorials for this?
>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>> Sincerely,
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Richard Dunne B.Sc.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Did you get it working? What xdebug INI settings have you
>>>>>>>>>>>>>>> set? Make sure to at least enable xdebug.remote_enable. Is
>>>>>>>>>>>>>>> the web server running directly on the host machine? Or in a VM of some
>>>>>>>>>>>>>>> kind? If the latter is the case, then you'll want to make sure
>>>>>>>>>>>>>>> xdebug.remote_host is set appropriately, as
>>>>>>>>>>>>>>> xdebug.remote_connect_back might not get the appropriate
>>>>>>>>>>>>>>> hostname/IP automatically.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Also, you can either set xdebug.remote_autostart or make
>>>>>>>>>>>>>>> sure you set a request variable or cookie of the expected
>>>>>>>>>>>>>>> name and value
>>>>>>>>>>>>>>> <https://xdebug.org/docs/remote#browser_session> when
>>>>>>>>>>>>>>> submitting the form. There are handful of nice browser plugins out there
>>>>>>>>>>>>>>> where you can enable the sending of the appropriate data to trigger the
>>>>>>>>>>>>>>> Xdebug session. And make sure your IDE is listening for Xdebug responses,
>>>>>>>>>>>>>>> of course. If anything, you can set xdebug.remote_log to
>>>>>>>>>>>>>>> try to get a better idea of what might be going on.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Let us know how things progress...
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> --Spencer
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>> Sincerely,
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Richard Dunne B.Sc.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>> Sincerely,
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Richard Dunne B.Sc.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Yes, if you set xdebug.remote_autostart you won't have to
>>>>>>>>>>>>>>> send the request data. Try setting xdebug.remote_log to a
>>>>>>>>>>>>>>> path where it can create a log file. Let us know what it says when you make
>>>>>>>>>>>>>>> a request to the server. Also what IDE are you using?
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> --Spencer
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>> Sincerely,
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Richard Dunne B.Sc.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Make sure to set xdebug.remote_log to a file path rather
>>>>>>>>>>>>>>> than to a directory. So try c:/wamp64/php/php7.1.9/xdebug.
>>>>>>>>>>>>>>> log. Sadly I haven't worked with Xdebug in Visual Studio
>>>>>>>>>>>>>>> Code yet. Hopefully there are some guides online that will help as well.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> --Spencer
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>> --
>>>>>>>>>>>>>> Sincerely,
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Richard Dunne B.Sc.
>>>>>>>>>>>>>>
>>>>>>>>>>>>> --
>>>>>>>>>>>>> Sincerely,
>>>>>>>>>>>>>
>>>>>>>>>>>>> Richard Dunne B.Sc.
>>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> --
>>>>>>>>>>> Sincerely,
>>>>>>>>>>>
>>>>>>>>>>> Richard Dunne B.Sc.
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> --
>>>>>>>>> Sincerely,
>>>>>>>>>
>>>>>>>>> Richard Dunne B.Sc.
>>>>>>>>>
>>>>>>>>
>>>>>>>> --
>>>>>>> Sincerely,
>>>>>>>
>>>>>>> Richard Dunne B.Sc.
>>>>>>>
>>>>>>
>>>>>> --
>>>>> Sincerely,
>>>>>
>>>>> Richard Dunne B.Sc.
>>>>>
>>>> --
>>>> Sincerely,
>>>>
>>>> Richard Dunne B.Sc.
>>>>
>>> --
>>> Sincerely,
>>>
>>> Richard Dunne B.Sc.
>>>
>>
>> --
> Sincerely,
>
> Richard Dunne B.Sc.
>
Received on Mon Mar 19 2018 - 17:43:56 GMT