[xdebug-general] Re: xdebug

Yes, XDebug is installed and loaded.

On Mon, 19 Mar 2018 at 12:11 Marco "Debo" De Bortoli <
marco.debo.debortoli[@]gmail.com> wrote:

> Hi Richard,
>
> sorry my bad, I should have specified that I'm using OSX hence the .so
> instead of the .dll.
> What about the remote host address, although it shouldn't be needed with
> phpstorm in listening mode?Did you verified that xdebug is loaded?
>
> On 19 March 2018 at 12:07, Richard Dunne <richarddunnebsc[@]gmail.com>
> wrote:
>
>> zend_extension=/usr/lib64/php/5.6/modules/xdebug.so
>> The ini file only uses .dll or so I thought. In any case, I don't have
>> xdebug.so in the ini if that's where its supposed to be.
>>
>> On Mon, 19 Mar 2018 at 11:19 Marco "Debo" De Bortoli <
>> marco.debo.debortoli[@]gmail.com> wrote:
>>
>>> Hi Richard,
>>>
>>> I'm not sure why is not working for you but I can notice few differences
>>> in you .ini configuration compared to the one I usually use myself. You can
>>> find it here <https://gist.github.com/debo/b6d212cdb759269de929>.
>>>
>>> Also, apologies if I'm asking something that you already mentioned but,
>>> did you ensure that the xdebug is actually loaded and active?
>>>
>>> In terms of how to debug, I usually use PhpStorm, I do activate the
>>> listening mode which the telephone shaped icon, then activate the xdebug
>>> helper in the browser in the page I want to debug and then start
>>> interacting with the page itself; also don't forget to add breakpoints or
>>> the debugger won't stop unless you tell it to stop on the first line.
>>>
>>> I hope it helps.
>>>
>>> Debo
>>>
>>> On 19 March 2018 at 11:08, Richard Dunne <richarddunnebsc[@]gmail.com>
>>> wrote:
>>>
>>>> I installed PhpStorm for comparison. PhpStorm opens the current script
>>>> in a web browser for user input. VSC doesn't do that. I'm still trying to
>>>> figure out why XDebug isn't engaging when the form is submitted in Listen
>>>> for XDebug config and XDebug Helper is engaged and in debug mode.
>>>> These are the settings I have
>>>>
>>>> launch.json
>>>> "version": "0.2.0",
>>>> "configurations": [
>>>>
>>>> {
>>>> "name": "Listen for XDebug",
>>>> "type": "php",
>>>> "request": "launch",
>>>> "port": 9000
>>>> },
>>>> {
>>>> "name": "Launch currently open script",
>>>> "type": "php",
>>>> "request": "launch",
>>>> "program": "${file}",
>>>> "cwd": "${fileDirname}",
>>>> "port": 9000
>>>> }
>>>> ]
>>>>
>>>> settings.json user settings
>>>> "php.validate.executablePath": "C:/wamp64/bin/php/php7.1.9/php.exe",
>>>> "php.executablePath": "C:/wamp64/bin/php/php7.1.9/php.exe",
>>>> "workbench.startupEditor": "newUntitledFile",
>>>> "files.autoSave": "onWindowChange",
>>>> "workbench.editor.enablePreview": false,
>>>> "git.ignoreMissingGitWarning": true
>>>>
>>>> phpForApache.ini
>>>>
>>>> [xdebug]
>>>> zend_extension =
>>>> "c:\wamp64\bin\php\php7.1.9\ext\php_xdebug-2.6.0-7.1-vc14-x86_64.dll"
>>>>
>>>> xdebug.remote_enable = On
>>>> xdebug.remote_autostart = 1
>>>> xdebug.remote_log = "c:/wamp64/php/php7.1.9/xdebug.log"
>>>> xdebug.profiler_enable = off
>>>> xdebug.profiler_enable_trigger = Off
>>>> xdebug.profiler_output_name = cachegrind.out.%t.%p
>>>> xdebug.profiler_output_dir ="c:/wamp64/tmp"
>>>> xdebug.show_local_vars=0
>>>>
>>>> Is there anything missing?
>>>>
>>>> On Sun, 18 Mar 2018 at 21:06 Richard Dunne <richarddunnebsc[@]gmail.com>
>>>> wrote:
>>>>
>>>>> I changed the log location to include the filename, but still no joy,
>>>>> log not created. Th documentation on XDebug is very limited
>>>>>
>>>>>
>>>>> On Sun, 18 Mar 2018 at 19:57 Spencer Williams IV <
>>>>> enderandpeter[@]yahoo.com> wrote:
>>>>>
>>>>>> On Sunday, March 18, 2018, 1:31:50 PM MDT, Richard Dunne <
>>>>>> richarddunnebsc[@]gmail.com> wrote:
>>>>>>
>>>>>>
>>>>>> I have set a path for xdebug.remote_log,
>>>>>> xdebug.remote_log = "c:/wamp64/php/php7.1.9"
>>>>>> I started XDebug in Visual Studio Code with Listen for XDebug config,
>>>>>> then I enabled debugging in the browser(XDebug Helper), then
>>>>>> selected Debug.
>>>>>> Submitted the form with the hope that XDebug would do its thing. The
>>>>>> code executed, but the debugger didn't do anything, such as create a log.
>>>>>>
>>>>>>
>>>>>> On Sun, 18 Mar 2018 at 16:52 Spencer Williams IV <
>>>>>> enderandpeter[@]yahoo.com> wrote:
>>>>>>
>>>>>> On Sunday, March 18, 2018, 9:38:46 AM MDT, Richard Dunne <
>>>>>> richarddunnebsc[@]gmail.com> wrote:
>>>>>>
>>>>>>
>>>>>> I'm familiar with code breakpoints, not the form handler. Is there
>>>>>> any documentation on that?
>>>>>>
>>>>>>
>>>>>> On Sun, 18 Mar 2018 at 07:58 Tim Hawkins <tim.thawkins[@]gmail.com>
>>>>>> wrote:
>>>>>>
>>>>>> You need to set a breakpoint on your form handler with your ide.
>>>>>>
>>>>>> On Sun, Mar 18, 2018, 10:52 Richard Dunne <richarddunnebsc[@]gmail.com>
>>>>>> wrote:
>>>>>>
>>>>>> These are the ini settings
>>>>>> zend_extension =
>>>>>> "c:\wamp64\bin\php\php7.1.9\ext\php_xdebug-2.6.0-7.1-vc14-x86_64.dll"
>>>>>>
>>>>>> xdebug.remote_enable = On
>>>>>> xdebug.remote_autostart = 1
>>>>>> xdebug.remote_log = "c:/wamp64/php/php7.1.9"
>>>>>> xdebug.profiler_enable = off
>>>>>> xdebug.profiler_enable_trigger = Off
>>>>>> xdebug.profiler_output_name = cachegrind.out.%t.%p
>>>>>> xdebug.profiler_output_dir ="c:/wamp64/tmp"
>>>>>> xdebug.show_local_vars=0
>>>>>>
>>>>>> "There are handful of nice browser plugins out there where you can
>>>>>> enable the sending of the appropriate data to trigger the Xdebug session"
>>>>>> This is new information. I thought once the debugger was set to
>>>>>> Listen for Xdebug, that's all that was required. I added XDebug Helper to
>>>>>> Chrome. Does it required any config within Visual Studio Code or php.ini?
>>>>>> Does XDebug Helper engage XDebug when a form is submitted?
>>>>>>
>>>>>>
>>>>>>
>>>>>> On Sat, 17 Mar 2018 at 21:49 Spencer Williams <
>>>>>> enderandpeter[@]yahoo.com> wrote:
>>>>>>
>>>>>> On 3/16/2018 12:34 PM, Richard Dunne wrote:
>>>>>>
>>>>>> How do I get XDebug to start debugging when I submit a form?. I
>>>>>> start the debugger, Step buttons are inactive and nothing happens when I
>>>>>> submit a form. Are there any tutorials for this?
>>>>>> --
>>>>>> Sincerely,
>>>>>>
>>>>>> Richard Dunne B.Sc.
>>>>>>
>>>>>>
>>>>>> Did you get it working? What xdebug INI settings have you set? Make
>>>>>> sure to at least enable xdebug.remote_enable. Is the web server
>>>>>> running directly on the host machine? Or in a VM of some kind? If the
>>>>>> latter is the case, then you'll want to make sure xdebug.remote_host
>>>>>> is set appropriately, as xdebug.remote_connect_back might not get
>>>>>> the appropriate hostname/IP automatically.
>>>>>>
>>>>>> Also, you can either set xdebug.remote_autostart or make sure you
>>>>>> set a request variable or cookie of the expected name and value
>>>>>> <https://xdebug.org/docs/remote#browser_session> when submitting the
>>>>>> form. There are handful of nice browser plugins out there where you can
>>>>>> enable the sending of the appropriate data to trigger the Xdebug session.
>>>>>> And make sure your IDE is listening for Xdebug responses, of course. If
>>>>>> anything, you can set xdebug.remote_log to try to get a better idea
>>>>>> of what might be going on.
>>>>>>
>>>>>> Let us know how things progress...
>>>>>>
>>>>>>
>>>>>> --Spencer
>>>>>>
>>>>>> --
>>>>>> Sincerely,
>>>>>>
>>>>>> Richard Dunne B.Sc.
>>>>>>
>>>>>> --
>>>>>> Sincerely,
>>>>>>
>>>>>> Richard Dunne B.Sc.
>>>>>>
>>>>>>
>>>>>> Yes, if you set xdebug.remote_autostart you won't have to send the
>>>>>> request data. Try setting xdebug.remote_log to a path where it can
>>>>>> create a log file. Let us know what it says when you make a request to the
>>>>>> server. Also what IDE are you using?
>>>>>>
>>>>>> --Spencer
>>>>>>
>>>>>> --
>>>>>> Sincerely,
>>>>>>
>>>>>> Richard Dunne B.Sc.
>>>>>>
>>>>>>
>>>>>> Make sure to set xdebug.remote_log to a file path rather than to a
>>>>>> directory. So try c:/wamp64/php/php7.1.9/xdebug.log. Sadly I haven't
>>>>>> worked with Xdebug in Visual Studio Code yet. Hopefully there are some
>>>>>> guides online that will help as well.
>>>>>>
>>>>>> --Spencer
>>>>>>
>>>>> --
>>>>> Sincerely,
>>>>>
>>>>> Richard Dunne B.Sc.
>>>>>
>>>> --
>>>> Sincerely,
>>>>
>>>> Richard Dunne B.Sc.
>>>>
>>>
>>> --
>> Sincerely,
>>
>> Richard Dunne B.Sc.
>>
>
> --
Sincerely,

Richard Dunne B.Sc.
Received on Mon Mar 19 2018 - 12:19:37 GMT